Setting Dolby Pro Logic Ii Mode; Setting Dolby Pro Logic Ii - Samsung HW-C500 User Manual

SETTING DOLBY PRO LOGIC II MODE

This mode provides 5.1 channel sound from 2 channel sources.
Press the PROLOGIC button on the remote control.
•
MOVIE : Adds realism to the movie soundtrack.
•
MUSIC : Provides 5.1 channel surround sound for digital, analog or existing stereo sources.
•
GAME : Enhances the excitement of the game's sound.
•
MATRIX : You will hear 5.1 channel surround sound.
•
PL (Pro Logic) : You will experience a surround effect with 5.1 channel surround sound.

SETTING DOLBY PRO LOGIC II

This function works only in Dolby Pro Logic ll MUSIC mode.
1. Press the SETUP/MENU button.
•
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2. Press the ENTER button to select SETUP ENTER.
Press the ▲▼ buttons to select DPLII SETUP, and then press the
3.
ENTER or ► button.
Press the ▲▼ buttons to select the option you want, and then press the
4.
ENTER or ► button.
•
PANORAMA : You can set it ON or OFF.
(This mode extends the front stereo image to include the surround
speakers for an exciting "wraparound" effect with side wall imaging.)
•
DIMENSION : You can set from -7 to +7.
(Incrementally adjusts the sound fi eld (DSP)from the front or surround.)
•
C- WIDTH : You can set from 0 to 7.
(This sets the width of the center sound image. The higher the setting,
the less sound comes from the center speaker.)
M

PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the mode is set to MUSIC.

You cannot use Dolby Pro Logic II mode for multi channel signals such as Dolby Digital and DTS.

Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
37