Page 1
HW-C900 AV Receiver System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register...
Safety information SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING • To reduce the risk of fi re or electric shock, do not expose this appliance to rain or moisture. •...
IMPORTANT SAFETY INSTRUCTIONS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth an uncontrolled environment.
Safety information PRECAUTIONS 3.9 inches 3.9 inches Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered.
Anynet+ is a function that can be used to operate this AV Receiver with a Samsung TV remote control, by connecting the receiver to a SAMSUNG TV using an HDMI Cable. (This function is available only in connection with Samsung TV and DVD player supporting Anynet+(HDMI-CEC).)
Contents SAFETY INFORMATION DESCRIPTION CONNECTIONS BASIC FUNCTIONS OF YOUR AV Safety Warnings Important Safety Instructions Precautions FEATURES Accessories Front Panel Rear Panel Display Insert Remote Control Batteries Operation Range of the Remote Control Tour of the Remote Control Speaker Positioning Connecting the Speakers Connecting the Bi-Amp Speaker Connecting the ZONE2 Speaker...
Page 7
SETUP OPERATION MISCELLANEOUS TROUBLESHOOTING APPENDIX Setup Menu Tree Setting the Speaker Size Connection setting for surround BACK Setting the Speaker Listening Distance Setting the Speaker Level Setting the Test Tone Setting Dolby Pro Logic Mode Setting Dolby Pro Logic IIx Setting Tone Control Setting NEO:6 Mode Setting EX/ES Mode...
Description FRONT PANEL 14 15 INPUT SELECT CONTROL AUDIO ASSIGN BUTTON AUDIO EFFECT BUTTON MULTI ZONE BUTTON SETUP BUTTON DISPLAY ENTER BUTTON ZONE2/BI-AMP INDICATOR TONE CONTROL BUTTON ASC BUTTON 19 20 21 22 Used to select a source. BD/DVD VCR CD IPOD VIDEO).
Page 9
Used to select the S.DIRECT mode. S.DIRECT BUTTON (Output the original signal as it is without applying the sound fi eld effect or any other sound effect. MASTER VOLUME CONTROL Adjusts the volume level. POWER Turns the receiver on/off. PHONE JACK Used to connect a set of headphones.
Page 11
OPTICAL IN JACKS (DIGITAL AUDIO IN) COAXIAL IN JACK (DIGITAL AUDIO IN) COMPONENT VIDEO IN JACKS COMPONENT VIDEO OUT JACKS HDMI IN JACKS HDMI OUT JACK USB PORT FM ANTENNA JACK iPod JACK MULTI CH IN JACKS VIDEO IN JACKS VIDEO OUT JACKS ZONE2 VIDEO OUT JACK SUBWOOFER AUDIO OUT JACKS...
Description DISPLAY SPEAKER INDICATORS LISTENING MODE INDICATORS TUNING INDICATORS AUDIO INPUT INDICATORS SPEAKER LEVEL INDICATOR RADIO FREQUENCY INDICATORS MESSAGE DISPLAY Displays the connected speakers. Displays the current listening mode. Displays the status of the current radio broadcast. Displays the audio input signal type of the currently connected external audio source. Displays the speaker level.
INSERT REMOTE CONTROL BATTERIES * Batteries (AAA size) Follow these precautions to avoid leaking or cracking cells: Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–). Assuming typical TV usage, the batteries last for about one year. ...
Description TOUR OF THE REMOTE CONTROL INPUT SELECT POWER TV SOURCE MAIN/ AMP/TV BD/DVD ZONE2 NEO:6 SLEEP DIMMER PROLOGIC AUDIO ASSIGN MUTE TUNING / CH TUNER SUB WOOFER MO/ST MEMORY SETUP/MENU INFO RETURN EXIT BD/DVD TV/AUX1 MULTI CH VCR/AUX2 iPod...
Page 15
POWER BUTTON AMP/TV BUTTON NUMBER BUTTONS NEO : 6 BUTTON PROLOGIC BUTTON SKIP BUTTONS STOP/PLAY BUTTON MUTE BUTTON VOLUME CONTROL BUTTONS SUBWOOFER BUTTON TUNER MEMORY BUTTON SETUP/MENU BUTTON UP/DOWN/LEFT/RIGHT BUTTONS RETURN BUTTON FUNCTION SELECTOR BUTTONS INPUT SELECT, TV SOURCE BUTTON MAIN/ZONE2 BD/DVD BUTTON SLEEP BUTTON...
Connections This section involves various methods of connecting the AV receiver to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. SPEAKER POSITIONING There are two methods for positioning the speakers. When using Dolby Pro Logic IIz, place the Surround Back Speakers in the FHL, FHR position and connect them to SURROUND BACK/ FRONT HEIGHT Jack.
Surround Speakers Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward. Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects and sound will not come from them all the time.
Connections CONNECTING THE SPEAKERS ACTIVE SUBWOOFER If you want to use two active subwoofer speakers, connect both subwoofer speakers into the SUBWOOFER OUT terminals in the rear panel. When using Dolby Pro Logic IIz, connect the Surround Back Speakers (FHL, FHR) to SURROUND BACK/FRONT HEIGHT Jack.
CONNECTING THE Bi-AMP SPEAKER Connect the tweeter (high range) port and woofer (low range) to the front port and surround back speaker port respectively as appropriate. Then, you can use the bi-amplifi cation feature that supports enriched high range and base tones.
Connections ZONE 2 • In addition to your main listening room, you can also enjoy playback in the other room (Zone 2). • You can simultaneously play back the same source in both the Main Zone and Zone 2. You can also play back the separate sources in the Main Zone and Zone 2.
Page 21
1. Connecting the speakers directly to the main unit (Powered ZONE2) This setup allows 5.1-channel playback in your main room and 2-channel stereo playback in Zone 2, with a different source in each room. • Connect your Zone 2 speakers to the AV receiver’s Surround Back Speaker terminals. ...
CONNECTING EXTERNAL DEVICES/YOUR TV VIA HDMI HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top box and more. HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source.
If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV receiver using the TV’s remote control. This function is available only in connection with Samsung TV and DVD player supporting Anynet +(HDMI-CEC).
CONNECTING TO YOUR TV VIDEO COMPONENT OPTICAL AUDIO Video Connection If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (P and Y) jacks on the back of your AV Receiver to the Component Video Input jacks on your TV.
CONNECTING A DVD OR BD(Blu-ray) PLAYER COMPONENT OPTICAL COMPONENT AUDIO Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (BD/DVD) (P jacks on the back of your AV Receiver to the Component Video Output jacks on your DVD/BD player. Connect a Video cable from the VIDEO IN (BD/DVD) jack on the back of your AV Receiver to the Video Output jack on your DVD/BD player.
CONNECTING A CABLE, SATELLITE OR SET-TOP BOX COMPONENT OPTICAL COMPONENT Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (SAT) (P on the back of your AV Receiver to the Component Video Output jacks on your SAT. Connect a Video cable from the VIDEO IN (SAT) jack on the back of your AV Receiver to the Video Output jack on your SAT.
CONNECTING A VCR VIDEO AUDIO VIDEO VIDEO AUDIO (For playback) (For recording) Video Connection For playback Connect a Video cable from the VIDEO IN (VCR) jack on the back of your AV Receiver to the Video Output jack on your VCR. For recording Connect a Video cable from the VIDEO OUT (VCR) jack on the back of your AV Receiver to the Video Input jack on your VCR.
Connections CONNECTING A CD PLAYER OPTICAL COAXIAL Audio Connection Connect the Digital Input (COAXIAL, OPTICAL1~3) on your AV Receiver to the Digital Output of the CD Player. Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player. ...
CONNECTING 7.1 CHANNEL DEVICES You can connect the AV receiver to a DVD player, SUPER AUDIO CD player or other device with 7.1 channel output. FRONT SURROUND 5.1 CH 7.1 CH CONNECTING THE TRIGGER OUT JACKS Once you connect TRIGGER OUT 1 and 2 ports on the rear panel to TRIGGER IN (if available) of the external device, you can control various functions of the external device including turning it on/off.
When the unit is powered on and you connect an iPod, the unit will charge your iPod's battery. Make sure to connect the dock connector so that the label “SAMSUNG” faces upward. “Made for iPod” means that an electronic accessory has been designed to connect specifi cally to an iPod and has been certifi...
Page 31
CONNECTING AN iPod (Continued) iPod models that are compatible with HW-C900 iPod nano iPod nano 1st generation 2nd generation 1GB 2GB 4GB (aluminum) 1GB 2GB 4GB iPod 1st+2nd generation 5GB 10GB 20GB iPod mini iPod 4GB 6GB 4th generation (color display) 20GB 30GB 40GB 60GB iPod touch...
Connections CONNECTING THE FM ANTENNA Connect the FM antenna supplied to the FM ANTENNA terminal as a temporary measure. Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface.
You can also turn the unit on/off by pressing the POWER button on the remote control. Remote control functions You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/DVD player with this remote control. See pages 62 ~ 64 for more details.
Page 34
Basic functions of your AV Receiver BASICS OF ZONE2 (Continued) Using the ZONE 2 controls Operation This Unit Main On POWER Zone 2 Mode MULTI ZONE Zone 2 Power On POWER Function (Turn on ZONE2 to display “Z” next to the display of the INPUT SELECT input source.)
MULTI ZONE Indicator Function In ZONE2 FM mode, you can switch only between the preset channels that you have specifi ed in the main zone. ZONE2 is enabled only for an analog input source; the digital source is not applicable. If you still encounter a failure after following all these instructions, check if the input source is of the analog type.
Basic functions of your AV Receiver SELECTING DIGITAL/(HDMI)/ANALOG You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit. Press the INPUT SELECT button to select a desired function (BD/DVD, SAT,TV, CD, AUX). See page 33. Press the AUDIO ASSIGN button on the remote control to select the audio input source of the external device you have connected.
Setup For your convenience, you can set this AV receiver's features for the best use. SETUP MENU TREE Here’s a quick look at how the setup menus are organized on your AV Receiver. AUDIO SETUP BD/DVD SPK SIZE SB SETUP SPK DISTANCE SPK LEVEL TEST TONE...
Page 38
Setup SETUP MENU TREE (Continued) AUDIO SETUP SPK SIZE SB SETUP SPK DISTANCE SPK LEVEL TEST TONE If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front Height Speaker (FHL/FHR). FRONT LARGE CENTER...
Page 39
SETUP MENU TREE (Continued) TEST TONE DPLIIX SETUP PANORAMA DIMENSION C- WIDTH TONE CONTROL TONE BASS TREBLE NEO:6 SETUP C-IMAGE EX/ES SETUP AUTO A/V SYNC SYNC OFF ~ SYNC 240MS (10MS Step) -7 ~ 0 ~ +7 -6dB ~ +6dB (1dB Step) -6dB ~ +6dB (1dB Step)
Page 40
Setup SETUP MENU TREE (Continued) MP3 ENHANCER SMART VOLUME ASC SETUP DRC SETUP AUTO DUAL MONO HDMI SETUP ANYNET+ VARIABLE SET VIDEO CONV. ZONE 2 SETUP 12-V TRIGGER START EQ ON / EQ OFF SYNC AUDIO TV ARC AUTO BYPASS FIXED VARIABLE CH1CH2...
SETTING THE SPEAKER SIZE Signal outputs and frequency response from the speaker will be adjusted according to your speaker confi guration and whether certain speakers are used or not. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
Setup CONNECTION SETTING FOR SURROUND BACK Settings for the surround back speaker differ depending on the connection method and installation site of the speaker to be connected. You must confi gure the SB SETUP settings according to the connected speaker before you listen to music properly.
SETTING THE SPEAKER LISTENING DISTANCE If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and surround speakers. Press the SETUP/MENU button on the remote control. •...
Setup SETTING THE SPEAKER LEVEL You can set the balance and level of speakers. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Press the ENTER button to select SETUP ENTER. Press the ▲▼...
SETTING THE TEST TONE Use the test tone to check the speaker connection status or level. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Press the ENTER button to select SETUP ENTER.
Setup SETTING DOLBY PRO LOGIC MODE This mode provides up to 7.1 channel sound from 2 channel sources, or provides 7.1 channel sound from 5.1 channel sources for music or movie mode. Press the PROLOGIC button on the remote control. •...
SETTING TONE CONTROL This will enable you to adjust the bass and treble level. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Press the ENTER button to select SETUP ENTER. Press the ▲▼...
Setup SETTING EX/ES MODE When surround back speakers are connected, you can listen to 7.1 multi-channel sound using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources.
MP3 ENHANCER This also helps enhance your sound experience (ex. mp3 music). Use this if you want to hear better sound from a low quality mp3 source. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
Setup ASC (AUTO SOUND CALIBRATION) SETUP By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1- channel sound fi...
DRC SETUP You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder. Press the SETUP/MENU button on the remote control. •...
- AVR : HDMI audio is not output • HDMI ANYNET+ : ON, OFF Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. - ON : Anynet+ is enabled. - OFF : Anynet+ is disabled.
VIDEO CONV. (Video Conversion) You can convert the incoming composite or component video signal into a maximum quality of the connected TV if you output the converted video via HDMI OUT. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
Setup ZONE2 SETUP You can use the remote control or the master volume of the main unit to adjust the volume of ZONE2. Press the SETUP/MENU button on the remote control. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
Operation USING THE SURROUND MODES Using the AUDIO EFFECT button on the front of the main unit Selecting the DPLIIx mode Press the AUDIO EFFECT button to select DPLIIX. • Each time you press this button, DPLIIX Press the UP/DOWN ( ,,. ) button. •...
Operation USING THE SURROUND MODES (Continued) Input Signal and Surround Chart o = active, – = inactive Input Signal Surround Mode Dolby Digital Dolby Digital Dolby Digital EX Dolby Digitital EX Dolby Digital + ProLogic IIx Dolby Digital + ProLogic Iiz Dolby Digital Plus Dolby Digital Plus Dolby TrueHD...
LISTENING TO THE RADIO You can listen to the radio by using either automatic or manual tuning. Press the INPUT SELECT button to select FM. Select a frequency (radio broadcast). • Preset tuning : Press the #,$ buttons on the remote control to select the preset frequency. •...
Operation USING AN iPod You can enjoy playback of your iPod using the supplied remote control. Listening to Music (iPod audio function) You can play music fi les stored in the iPod player by connecting it to the AV receiver. Connect the iPod dock connector to the iPod jack on the AV Receiver.
USING AN iPod (Continued) Watching a Movie (iPod Video function) You can play video fi les stored in the iPod player on a TV by connecting it to the AV receiver. Connect the iPod dock connector to the iPod jack on the AV receiver.
Operation CONVENIENT FUNCTIONS Sleep timer function You can set the time that this unit will shut itself off. Press the SLEEP button. • SLEEP : OFF selected in turn. To check sleep timer Press the SLEEP button. • The remaining time before this unit will shut itself off is shown on the display. •...
Do not turn the volume up too high when you use headphones as it may damage your hearing. SOFTWARE UPGRADE Samsung may offer upgrades for AV Receiver's fi rmware in the future. Please visit Samsung.com or contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive.
You can use the TV POWER, VOLUME, CHANNEL, MENU and Numeric buttons (0~9). The remote control may not work on some brands of TVs. Also, some operations may not be possible depending on your brand of TV. The remote control will work with Samsung TVs by default.
The remote control may not work on some brands of DVD. Also, some operations may not be possible depending on your brand of DVD. The remote control will work with Samsung DVD (BD) by default. DVD Brand Code List Brand...
Troubleshooting Before requesting service, please check the following. Symptom The unit will not turn on. • Is the power cord plugged into the outlet? A function does not work • Is there static electricity in the air? when the button is pressed. Sound is not produced.
Troubleshooting Symptom Can't select Dolby Pro • Is the input signal selected properly? Logic llx mode. Can't select NEO:6 mode. • Is the input signal selected properly? There is no sound when • Is Digital input selected? playing a DTS encoded DVD.
* S/N Ratio, Distortion, Separation and Usable sensitivity are based on measurement using AES (Audio Engineering Society) guidelines. - Samsung Electronics Co., Ltd reserves the right to change the specifi cations without notice. - Weight and dimensions are approximate. - Design and specifi cations are subject to change without prior notice.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.
Page 69
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area Contact Center ` North America Canada 1-800-SAMSUNG (726-7864) www.samsung.com Mexico 01-800-SAMSUNG (726-7864) www.samsung.com U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com...
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE Samsung Electronics America, Inc. 1-800-SAMSUNG IN THE US www.samsung.com/us 105 Challenger Road Ridgefi eld Park, (7267864) NJ 07660-0511 Code No. AH68-02312R...
Need help?
Do you have a question about the HW-C900-XAA and is the answer not in the manual?
Questions and answers