Table of Contents
Advertisement
NEO:6 Mode
You can play back 2 channel sound in 6.1 channel of 360 degree surround when enjoying music or movie.
REMOTE CONTROL
1
To Exit Setup Mode
Wait for about 5 seconds.
•
Caution!
NEO:6 Mode can be used in multi channel signal
•
encoded to Dolby Digital or DTS.
Pro Logic works only for PCM audio signals with sampling
•
frequency of 32KHz, 44KHz or 48KHz..
31
Press NEO:6 MODE button.
Each time you press this button, MUSIC
CINEMA will be selected in turn.
•
NEO : 6 Mode
This mode decodes 2 channel signals to high precision digital matrix
decoder.
DTS NEO:6 decoder discretes 2 channel sound to Discrete 6.1
channel sound.
MUSIC : NEO:6 MUSIC Mode is used as optimized to music
•
according to played signal.
•
CINEMA : NEO:6 CINEMA Mode is used as optimized to movie
according to played signal.
MAIN UNIT
1
Press SURROUND button briefly to select "NEO:6" Mode.
Each time you press this button, DPL ll x
NEO:6
•
selected in turn.
2
Press SELECT(
) button.
,
Each time you press this button, MUSIC
CINEMA will be selected in turn.
•
To Set Sound Image of Center Speaker
If TV (or screen) is installed high, you can feel the balance of sound and image by
raising the sound image of Center Speaker.
1
Press and hold SURROUND button for about 5 seconds.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press INPUT button 9 times.
•
"NEO:6 MODE" appears on the display.
3
Press SURROUND button.
•
"CEN-IMG" appears on the display.
4
Press SELECT(
) button to set the sound image you want.
,
•
You can set the sound image from 0 to 5.
To Exit Setup Mode
Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. 'SETUP MODE OFF' appears
•
on the display and exits Setup Mode.
Caution!
You can use this function to set the sound image of Center
•
Speaker only in the main unit.
SFE
STEREO will be
32
Advertisement
Table of Contents
