Samsung HW-D600 User Manual page 47

✎
NOTE

Channel status displays are dependent on the speaker confi guration.

SFE mode works with 2-ch signals.

If Dolby Pro Logic IIz is set to On, the Surround Back speaker(SBL/SBR) is changed to the Front
Height Speaker(FHL/FHR), Dolby true HD, Dolby plus, DTS-HD Audio ,SFE and NE0:6 will be
output 5.1 channel.

ProLogic IIx and ProLogic IIz works only audio signals with sampling frequencies of 32KHz,
44KHz or 48KHz.
Using the AUDIO EFFECT Button On the Front of the Main Unit
Selecting the DPLIIx mode
1. Press the AUDIO EFFECT button to select DPLIIx mode.
•
Each time you press this button,
be selected in turn.
<
2. Press the ,
•
Each time you press the
MOVIE will be selected in turn.
If you turn Dolby Pro Logic IIz on, HEIGHT  PL OFF will be selected in turn.
•
•
You can also select the DPLIIx mode by pressing the PROLOGIC button on the remote control.
Selecting the NEO:6 mode
1. Press the AUDIO EFFECT button briefl y to select NEO:6 mode.
•
Each time you press this button,
be selected in turn.
<
2. Press the ,
•
Each time you press the
•
You can also select the NEO:6 mode by pressing the NEO : 6 button on the remote control.
Selecting the DSP mode
1. Press the AUDIO EFFECT button to select DSP mode.
•
Each time you press this button,
be selected in turn.
<
2. Press the ,
•
Each time you press the
J.CLUB  CHURCH  ROCK  CLASSIC  LIVE  GAME  MOVIE  CONCERT 
STADIUM will be selected in turn.
•
You can also select the DSP mode by pressing the DSP button on the remote control.
HW-D600_D650S_ELS_0603.indd 47 HW-D600_D650S_ELS_0603.indd 47
>
button.
< >
button, MUSIC  GAME  MATRIX  PL  PL OFF 
,
>
button.
< >
button, MUSIC  CINEMA  OFF will be selected in turn.
,
>
button.
< >
button, STEREO  HALL 1 HALL 2 
,
 
 
 
 3D SOUND will
 3D SOUND will
 3D SOUND will
47
English
2011-06-03 2011-06-03 12:40:38 12:40:38