Acg Fuse - Honda BF250A Owner's Manual

ACG Fuse

5 mm SCREWS
JUNCTION
BOX COVER
SPARE FUSE
PAWLS
(150 A)
<Replacement>
A spare fuse is located on the junction
box.
Push two pawls, then pull out the
spare fuse.
1. Stop the engine.
2. Disconnect the battery (see page
99).
ACG FUSE
3. Remove the engine cover (see page
(150 A)
40).
4. Open the junction box cover.
5. Remove the old fuse by removing
two 5 mm screws.
6. Install a new fuse by tightening two
5 mm screws.
7. After finishing replacement, close
the junction box cover.
MAINTENANCE
101