Fuse - Honda BF250A Owner's Manual

MAINTENANCE

Fuse

Before replacing the fuse, check the
current ratings of the electrical
accessories and ensure that there are
no abnormalities.
• Never use a fuse with a different
rating from that specified.
Serious damage to the electrical
system or a fire may result.
• Disconnect the battery cable at
the battery negative (–) terminal
before replacing the fuse.
Failure to do so may cause a
short circuit.
If the fuse is blown, check the
cause, then replace the fuse with a
spare fuse of the same rated
capacity. Unless the cause is found,
the fuse may blow again.
100
<Replacement>
SPARE FUSES FUSES
(10 A, 15 A, 30 A) (10 A, 15 A , 30 A)
JUNCTION
BOX COVER
FUSE PULLER
1. Stop the engine.
2. Disconnect the battery (see page
99).
3. Remove the engine cover (see page
40).
4. Open the junction box cover.
FUSE PULLER
BLOWN FUSE
5. Pull the old fuse out of the clip with
the fuse puller supplied in the fuse
box.
6. Push a new fuse into the clips.