Honda BF250A Owner's Manual page 86

SEALING WASHER
GUIDE
DRAIN PLUG COVER
3. Set the drain plug cover under the
guide.
4. Place a suitable container under the
guide.
5. Remove the engine oil drain bolt
and sealing washer using the 12
mm wrench and drain the engine
oil.
Install a new sealing washer and drain
bolt, and tighten bolt securely.
UPPER
LEVEL
MARK
LOWER
LEVEL
MARK
DRAIN BOLT
6. Refill to the upper level mark on
the oil level dipstick with the
recommended oil.
OIL LEVEL DIPSTICK
MAINTENANCE
OIL FILLER CAP
7. Reinstall the oil filler cap securely.
Do not overtighten.
Please dispose of used outboard
motor oil in a manner that is
compatible with the environment. We
suggest you take it in a sealed
container to your local service station
for reclamation. Do not throw it in the
trash or pour it on the ground.
Wash your hands with soap and water
after handling used oil.
85