Appendix A: Genicam Commands; Camera Information Category; Camera Information Feature Descriptions - Teledyne Linea 2K CL User Manual

Appendix A: GenICam
Commands
This appendix lists the available GenICam camera features. Access these features using the
CamExpert interface.
Features listed in the description table but tagged as Invisible are typically reserved for Teledyne
DALSA Support or third party software usage, and not typically required by end user applications.

Camera Information Category

Camera information can be retrieved via a controlling application. Parameters such as camera
model, firmware version, etc. are read to uniquely identify the connected Linea CL device. These
features are typically read-only. GenICam applications retrieve this information to identify the
camera along with its characteristics.
The Camera Information Category groups information specific to the individual camera. In this
category the number of features shown are identical whether the view is Beginner, Expert, or Guru.
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or
third party software usage—not typically needed by end user applications.

Camera Information Feature Descriptions

The following table describes these parameters along with their view attribute. Additionally the
Standard column will indicate which parameter is a member of the custom DALSA Features Naming
Convention (denoted by DFNC), versus the GenICam Standard Features Naming Convention (SFNC
not shown).
Appendix A: GenICam Commands • 57
Linea CL Series Camera