Resetting The Camera - Teledyne Linea 2K CL User Manual

Resetting the Camera

The Restart Camera feature, part of the Transport Layer category, resets the camera. The camera
resets with the default settings, including a baud rate of 9600.
Transport Layer
Parameter
Restart Camera
If camera detection is enabled, Teledyne DALSA frame grabber serial port settings are by default
configured to auto-detect and maximize the baud rate. To verify the setting, use the Sapera
Configuration utility, or in CamExpert use the Tools > Camera Detection > Settings menu
command to open the Communication Settings dialog.
Related ASCII Commands
reset camera
rc
Linea CL Series Camera
Description
Resets the camera and puts in the default settings, including a
9600 baud rate.
Camera Operation • 47