Borderless Printing At Actual Size (Mac Os) - Canon imagePROGRAF iPF680 User Manual

Borderless Printing at Actual Size (Mac OS)

7
Click the Page Setup tab to display the Page Setup
sheet.
8
A
In the Page Size list, click the size of the original as specified in the source application. In this case, click
10"x12".
9
Select and click a roll paper in the
10
Select the
play the Information dialog box.
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
C
In Borderless Printing Method, click
14
Confirm the print settings and print as desired.
Note
Borderless Printing at Actual Size (Mac OS)
Borderless Printing at Actual Size (Mac OS)
This topic describes how to print borderlessly at actual size based on the following example.
76
•
When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at
the edges. If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed
Important
Settings dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once
printed and cut, please cut the upper and lower bands with scissors.
Document: Any type
•
• Page size: 10 × 12 inches (254.0×304.8 mm)–Borderless
L
B
Borderless Printing check box to dis-
•
For tips on confirming print settings, see "Confirming Print Settings ."
Paper Source list.
F
Print Image with Actual Size.
P.145
➔
User's Guide
iPF680