Adjusting The Feed Amount; Selecting A Feed Amount Adjustment Method - Canon imagePROGRAF iPF680 User Manual

iPF680

Adjusting the feed amount

Adjusting the feed amount
Adjusting the Feed Amount ............................................................................................................................ 487

Selecting a Feed Amount Adjustment Method ........................................................................................... 487

Automatic Banding Adjustment ................................................................................................................. 488
Manual Banding Adjustment ...................................................................................................................... 489
Fine-Tuning the Paper Feed Amount ......................................................................................................... 491
Adjusting Line Length ................................................................................................................................ 491
Adjusting the Vacuum Strength ...................................................................................................................... 493
Adjusting the Feed Amount
Adjusting the Feed Amount
If printed documents are affected by the following problems, try adjusting the feed amount.
Banding in different colors
•
• Line length is not accurate in the direction paper is fed
To adjust the feed amount, do the following, in this order.
1
Depending on the issue, adjust Adj. Priority to suit the particular type of paper.
(See "Selecting a Feed Amount Adjustment Method.")
2
Execute Adj. Quality or Adjust Length, depending on the selection in Adj. Priority.
(See "Automatic Banding Adjustment.")
(See "Manual Banding Adjustment.")
(See "Adjusting Line Length.")
3
After executing Adj. Quality, execute Adj. Fine Feed for further adjustment as needed.
(See "Fine-Tuning the Paper Feed Amount.")
Selecting a Feed Amount Adjustment Method
Selecting a Feed Amount Adjustment Method
Methods of adjusting the amount paper is fed are set in Adj. Priority.
Adjust Adj. Priority to suit your particular printing application.
• Print Quality: Adjusts the feed amount to reduce banding across the sheet in printed documents.
Adj. Quality settings are applied. When Adj. Fine Feed is executed, the Adj. Fine Feed settings are applied
in addition to the Adj. Quality settings.
Print Length: Adjusts the feed amount for better accuracy of lines in printed documents.
•
The settings of A:High or B:Standard/Draft in Adjust Length are applied.
Automatic: Print Quality or Print Length is selected, depending on Print Priority as selected in the printer
•
driver at the time of printing.
Image or Office Document: Print Quality is selected.
Line Drawing/Text: Print Length is selected.
•
Either A:High or B:Standard/Draft in the Adjust Length menu is applied, depending on printer driver settings at
the time of printing.
Note
•
If you have selected Easy Settings in the printer driver, follow these steps to confirm the Print Priority setting.
•
Windows: Click View Settings on the Main tab to display the View Settings dialog box.
•
Mac OS: Click View set. on the Main pane to display the View set. dialog box.
Follow these steps to configure the settings.
1
Load the paper.
• Attaching the Roll Holder to Rolls
• Loading Rolls in the Printer
Loading Sheets in the Printer
•
User's Guide
➔
P.488
➔
P.489
➔
P.491
➔
P.491
➔
P.336
➔
P.339
➔
P.357
➔
P.487
Adjusting the Feed Amount
487