Canon imagePROGRAF iPF680 User Manual page 162

Page Setup Sheet
• C
Enlarged/Reduced Printing
Choose from the following options when this setting is activated.
• Resizing Originals to Match the Paper Size
• Resizing Originals to Fit the Roll Width
Resizing Originals by Entering a Scaling Value
•
• D
Fit Paper Size
Scales the document image to match the paper size.
• E
Fit Roll Paper Width
Scales the document image to match the roll width.
• F
Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
• G
Paper Size
Choose the size of the paper you will print on.
For details on available paper sizes, see "Paper Sizes."
• H
Orientation
Choose the printing orientation.
• Making the Original Orientation Match the Paper Orientation
• K
Rotate Page 90 degrees (Conserve Paper)
Activate this setting to rotate the document image by 90 degrees before printing.
• Conserving Roll Paper by Rotating Originals 90 Degrees
• L
Paper Source
Choose the feed source, as desired.
Options displayed in the list vary depending on the selection in Media Type on the Main sheet.
• M
Roll Paper Width
Choose the roll width.
For details on available roll widths, see "Paper Sizes."
• N
Roll Paper Options
Complete optional roll paper settings. Click to display the Roll Paper Options dialog box.
162
A
Under Automatic Cutting, you can specify Yes or No and Print Cut Guideline.
• Cutting Roll Paper After Printing
B
Select Banner Printing when printing multiple pages continuously.
Printing Multiple Pages Continuously
•
P.60
➔
P.62
➔
P.65
➔
P.326
➔
➔
P.326
➔
P.137
➔
P.104
➔
P.133
➔
P.123
iPF680
User's Guide