Table of Contents
Advertisement
Table 6-4 (cont'd)
KEY
FLOW
RATE
TOTAL
VOLUME
TUBE ID
CALIBRATE
and
Language
Button
6-20
DISPLAY
SHOWS
xxx mL/min
or
Press the FLOW RATE key. The display flashes the calculated
xxx L/min
fluid flow rate (xxx mL/min or xxx L/min).
xxx mL
or
1.
xxx Liters
2.
TUBE ID=xxx
Press the TUBE ID key. If the red LED next to the CALIBRATE
key is not lit, the display flashes the current TUBE ID setting. If
the red LED next to the CALIBRATE key is lit, the display flashes
the message "CALIBRATED TUBE!".
CALIBRATED!
or
not calibrated
1.
To calibrate a tube:
2.
NOTE: if you press the UP and DOWN ARROW keys, the display
xxx mL
or
xxx Liters
NOTE:
TOTAL VOLUME MODE
ACTION TAKEN
AND PROCEDURE
Displays actual FLOW RATE
Displays current TOTAL VOLUME setting
Press the TOTAL VOLUME key. The display flashes the
TOTAL VOLUME setting you selected just before starting
the pump.
Use the UP and DOWN ARROW keys to enter the TOTAL
VOLUME setting you desire. As you use the UP and DOWN
ARROW keys, the display changes accordingly.
Displays current TUBE ID
Displays calibration state
Press the CALIBRATE key. If the red LED next to the
CALIBRATE key is not lit, the display shows "not
calibrated". If the red LED next to the CALIBRATE
key is lit, the display shows "CALIBRATED!".
Press the START/STOP key to stop the pump. The display
returns to the STOPPED Display Mode. For detailed
instructions on "Calibrating a Tube", refer to Section 5.5.
shows the current TOTAL VOLUME setting. This setting
changes accordingly as you use the UP and DOWN
ARROW keys.
if you press the Language button, the display changes
to the next language in the sequence: English, French,
Spanish, German, and Italian.
Advertisement
Table of Contents
