Table of Contents
Advertisement
Display shows
xx:xx:xx
ACTION
TIME setting scrolls up
7.
To change the SECONDS setting, press the TIME key repeatedly, until the
SECONDS flash. Use the UP and DOWN ARROW keys to enter the SECONDS
setting you desire.
8.
Once the display shows the TIME setting you desire, press the START/STOP key.
As the fluid begins to dispense, the non-flashing display shows the actual time
that the pump has been running.
In the TIME Mode, the pump stops running after it counts up to the TIME
setting.
To stop pumping before that time, press the START/STOP key. The pump
stops running, and the display returns to the STOPPED Display Mode.
Table 6-3 shows how other keys and buttons can be used while pumping in the
TIME mode.
Operating the Pump Motor in the RUNNING Display Mode
TIME
Display shows
xx:xx:xx
ACTION
Displays current
TIME setting
START
STOP
Display
xx:xx:xx
ACTION
Pump(s) starts;
press again pump(s)
stops
NOTE
Display shows
xx:xx:xx
ACTION
TIME setting scrolls down
6
6-13
Advertisement
Table of Contents
