Omega Engineering OMEGAFLEX FPU5-MT-110 User Manual page 37

5
Operating the Pump Motor in the STOPPED Display Mode
RPM
Display shows
xxx rpm
ACTION
Displays current
RPM setting
FLOW
RATE
Display shows
xxx mL/min
ACTION
Displays current
FLOW RATE setting
TIME
Display shows
xx:xx:xx
ACTION
Displays current
TIME setting
The flashing group
(SECONDS, MINUTES, or
HOURS) is the one that will
scroll when the UP or
DOWN ARROW key is
pressed. Pressing the TIME
key again will select a
different group.
TOTAL
VOLUME
Display shows
xxx mL or xxx Liters
ACTION
Displays current
TOTAL VOLUME
setting
5-10
Using the UP ARROW key ( ) will cause the RPM setting to scroll up to 600 rpm
then roll over to 10 rpm.
OR
Using the DOWN ARROW key ( ) will cause the RPM setting to scroll down to
10 rpm then roll over to 600 rpm.
Using the UP ARROW key ( ) will cause the FLOW RATE value to scroll up to
the maximum FLOW RATE determined by TUBE ID then scrolls over to the
minimum FLOW RATE.
OR
Using the DOWN
down to the minimum FLOW RATE determined by TUBE ID then scrolls over
to the maximum FLOW RATE.
Using the UP ARROW key ( ) will cause the flashing TIME setting to scroll up
to maximum then roll over to "0". The maximum time is 12 hours, 59 minutes
and 59 seconds (12:59:59).
OR
Using the DOWN ARROW key ( ) will cause the flashing TIME setting to scroll
down to "0" then roll over to the maximum. The maximum time is 12 hours,
59 minutes and 59 seconds (12:59:59).
Using the UP ARROW key ( ) will cause the display to scroll up to a maximum of
10000 liters then over to 1 mL.
OR
Using the DOWN ARROW key ( ) will cause the display to scroll down to 1 mL
then roll over to 10000 liters.
key will cause
ARROW ( ) the FLOW RATE value to scroll