Table of Contents
Advertisement
Table 6-1
KEY
ON/OFF Switch
START
STOP
INLET
SELECT
PRIME
TEMP
RPM
TIME
DISPLAY
SHOWS
xxx rpm
NOTE: if you turn off the pump motor's power, the pump stops
To continue pumping, turn on the unit's power. The display
returns to the STOPPED Display Mode and shows the current
RPM setting. The accumulated time of pumping and volume
dispensed is reset to zero. Then press the START/STOP key.
xxx rpm
To resume pumping at the current setting, press the
START/STOP key. The display enters the RUNNING Display
Mode, and the fluid begins to dispense.
Must STOP first!
To select the other inlet and reverse the direction of pumping:
1.
2.
3.
4.
Pumps fluid at current RPM setting as long as the key is pressed
STOP to Prime...
To prime a tube:
1.
2.
3.
4.
xxx °C
NOTE: The TEMP key functions the same whether the pump is
xxx rpm
1.
2.
xx:xx:xx
Press the TIME key. The display flashes the time that the pump
has been running (xx:xx:xx).
RPM MODE
ACTION TAKEN
AND PROCEDURE
Pump motor's power
running.
Pump(s) stops; press again pump(s) starts
LEDs indicate new pump direction
Press the START/STOP key. The display returns to the
STOPPED Display Mode.
Press the INLET SELECT key to reverse the direction of
pumping.
Press the START/STOP key again to resume pumping.
For detailed instructions on "Defining the Direction of
Pumping, refer to Section 5.2.
Press the START/STOP key to stop the pump. The display
returns to the STOPPED Display Mode.
Press and hold down the PRIME key to prime the tube.
Press the START/STOP key again to resume pumping.
For detailed instructions on "Priming a Tube", refer to Section
5.4.
Display alternates when pressed, °C then °F
stopped or running. Refer to Section 5.6.
Displays current RPM setting
Press the RPM key. The display flashes the RPM setting
you selected just before starting the pump.
Use the UP and DOWN ARROW keys to enter the RPM
setting you desire. As you use the UP and DOWN ARROW
keys, the display changes accordingly.
Displays cumulative TIME since start
6-3
Advertisement
Table of Contents
