This time user can press the button to enter PIN (support 0-9 number button), the PIN has
been entered will display in the second line as *, see below
Each key press for the PIN Entry will give a Beep as a reminder.
If you want to delete the last entered character, press backspace; if you want to delete all
characters entered, press cancel; to complete the PIN Entry, press enter.
After the Entry completes, the LCD backlight and green LED will turn off.
The user can choose the function of re-enter the PIN, see below:
If you want to delete the last entered character, press backspace; if you want to delete all
characters entered, press cancel; to complete the PIN Entry, press enter.
4.15 Cancel PIN Entry
4.15.1 Command Format
Sending data
CMD
0x8e
Responding data
CMD
0x8e
Or responding data is
CMD
0x0e
PLS Input
PIN:
****
PLS Same
again:
****
LEN
0x00
LEN
0x00
LEN
0x01
EDC
Verification
EDC
Verification
DATA
Error Code
Verification
EDC