4.2.2 Command Description
Choose the designated operational directory. The purpose of directory partition is for
insolating different applications. Each sensitive service operation is done in its own
subdirectory, so it is controlled by its subdirectory's authentication KEY. This command is
for choosing current directory for all further operations. When current directory has been
selected, it won't be changed until user chooses other directory or using the reset command.
4.3 UID setting
4.3.1 Command Interface
Sending data
CMD
LEN
0x94
0x16
UID: User ID, 16-bytes in plaintext, which is used for identifying the PINPAD and
generating authentication code. Once it has been set, no change is allowed.
Responding data package:
Finish the UID setting correctly, responding data package:
CMD
0x94
If setting wrong, the responding data package is:
CMD
0x14
Error Code:
0x01
Sending Data Length Field Error
0x0d
EDC error
0xe1
UID have been set already
0xff
Exception
DATA
UID(16 bytes)
LEN
EDC
0x00
Verification
LEN
DATA
0x01
Error Code
EDC
Verification
EDC
Verification