Table of Contents
Advertisement
Re-enter component 3：
Download successful.
KEY component input keyboard instruction:
Enter the KEY component need to use the hex rules, so 16-byte KEY component needs
32 characters. Number keys, backspace (cancel entered character), Cancel Key (cancel
all entered characters), Enter (confirm the input) are available for KEY component input.
The way of input A-F letter is: Press F2 to start the letter input mode, at this time, the
keys of 1-5 are respectively correspond to the letter A-F. For example, if you want to
enter letter A, firstly you press F2, then press 0. If you want to enter 1AB2, the press
order is "1, F2, 0, F2, 1, 2". Press F1 to return to number input mode from letter input
mode.
4.7 Issue NL-PP66
4.7.1Command Format
Sending data：
CMD
LEN
0xd4
0x31
Hold (16 byte): this field is reserved, function not defined yet
Water number or barcode: using for issue's device management. The issuer can define its
own device water number and retrieve this data from device version command.
Subdirectory's partition number (1 byte): The partition number after re-initialization,
maximum is 4.
Install record (8 byte): When publisher make the initialization set this mark, using to identify
Input again:
(32 Hex)
Reserved
serial number
(16 byte)
or barcode
number
(16 byte)
DATA
sub-dir's
Installat
partition
ion
number
record
(1 byte)
(8 byte)
EDC
AuthCode
Verification
(8 byte)
Advertisement
Table of Contents
