Table of Contents
Advertisement
Keyboard guidance for Key Components input：
Enter the KEY component need to use the hex rules, so 16-byte KEY component needs
32 characters. Number keys, backspace (cancel entered character), Cancel Key (cancel
all entered characters), Enter (confirm the input) are available for KEY component
input.
The way of input A-F letter is: Press F2 to start the letter input mode, at this time, the
keys of 1-5 are respectively correspond to the letter A-F. For example, if you want to
enter letter A, firstly you press F2, then press 0. If you want to enter 1AB2, the press
order is "1, F2, 0, F2, 1, 2". Press F1 to return to number input mode from letter input
mode.
3.5 The input of Master KEY/Fixed KEY/initial DUKPT
KEY
The input of Master KEY/Fixed KEY/initial DUKPT KEY is set by administrator by entering
key components from PINPAD's keyboard. The entry of such keys requires correspond
password validation. Please refer to chapter 3.3 for the password entry screens.
Once you passed the password validation, the screen for key component input will appear,
see the figure below：
Enter KEY component 1
Enter KEY component 2:
Enter KEY component 3:
key component1:
(32 Hex)
key component2:
(32 Hex)
key component3:
(32 Hex)
Advertisement
Table of Contents
