Enter Password 3 (the input of corresponding KEY component 3):
3.4 The input of Authentication KEY
Authentication key is set by administrator by entering key components from PINPAD's
keyboard; no change is allowed after it is set. The entry of authentication key requires
correspond password validation. Please refer to chapter 3.3 for the password entry screens.
Once you passed the password validation, the screen for key component input will appear,
see the figure below:
Enter AuthKEY component 1:
Enter AuthKEY component 2:
Enter AuthKEY component 3:
After all KEY components are entered, you will be asked to enter then again for
confirmation.
Only if the two inputs are identical, the PINPAD will save the setting.
Input PSW3:
Authkey compone
nt1:(32 Hex)
Authkey compone
nt2:(32 Hex)
Authkey compone
nt3:(32 Hex)
Input again:
(32 Hex)