Pedal - Progression Fitness 1638 Elliptical Owner's Manual

ASSEMBLY INSTRUCTIONS
STEP 4
NOTE: There is a "L" decal on the LEFT PEDAL BRACKET(56) attached to the left PEDAL RAIL
ASSEMBLY. Attach the left PEDAL RAIL ASSEMBLY to the left side of the Elliptical unit. There is
a "R" decal on the RIGHT PEDAL BRACKET(57) attached to the right PEDAL RAIL ASSEMBLY.
Attach the right PEDAL RAIL ASSEMBLY to the right side of the Elliptical unit.
Attach the RIGHT PEDAL ARM(14) to the MAIN FRAME(1) with SCREWS(M10x85mm)(101),
M10 WASHER(110), and M10 NYLOCK NUT(106).
Connect the RIGHT PEDAL ARM(14) to RIGHT PIVOTING ARM(11), and secure with
SCREWS(M8x90mm)(100) and M8 NYLOCK NUT(105).
STEP 5
Connect the RIGHT LINKAGE(13) to the RIGHT LOWER HANDLEBAR POST(12) and secure
with SCREWS(M8x90mm)(100) and M8 NYLOCK NUT(105).
Attach the REAR RAIL CAP(72) to the RIGHT PEDAL ARM(14).
Attach the PEDAL CAPS(79) onto the RIGHT PEDAL BRACKET(57) with SCREWS
(M8 x 16mm)(97). CAUTION: The lip on the PEDAL CAPS(79) must face inside.
The sides without a lip face outside as shown.
STEP 6
Repeat the above steps on the left side. 6