Telstra VVX500 Phone Manual

Telstra VVX500 Phone Guide
If you are required to initially configure you
IP phone you will be advised of the
Username and Password. This information
only needs to be entered once via the
QSetup soft key.
Tap the QSetup soft key
Tap the Server User field
Enter the Server User credentials (obtain
this information from Telstra.
This number will be your phone number)
Tap the Server Password field
Tap the Mode soft key and tap 123 (to
select numbers)
Enter the Server password (obtain this
information from Telstra)
Tap Save Config to Save the Config
Telstra VVX 500 Phone Guide | July 2014
You will now need to manually reboot the
phone
Press the Home button
Tap Settings
Tap Basic, swipe your finger up the screen
and
Tap Restart Phone
Tap the Yes soft key (to confirm)
Note 1: Restarting the phone may take a few
15 minutes
Note 2: If your phone has been preconfigured
the QSetup soft key will not be visible
Note 3: This is only required for phones that are
on DMS (Device Management System)
platform.
Your phone has a touch-sensitive screen.
To access features or obtain information,
tap the menu items, soft keys (the keys
along the bottom of the touch screen) and
field that display on the touch screen
To access further screens, swipe the
screen (move your finger across the
screen), either left or right to display further
screens.
Your VVX 500 Media phone supports a
Polycom USB camera
Slot on the back of your
phone for Polycom USB
camera
To enter the Home View main menu, press
To return to the Line View, press
To select a menu item, tap the menu icon
To select a soft key, tap the soft key
To select an option in a list, tap the option
To scroll through menu items listed on more
than one screen, touch the screen and drag
your finger in the required direction (Up, Down,
Left or Right)
OR
Swipe the screen, by moving your finger across
the screen in right to left or left to right motion
to display further screen options
To return to previous screen, tap Back
Page 1