Installation Procedure For In-Ceiling With A Ceiling/Wall - Canon VB-C500VD Start Manual

Installation Procedure for In-Ceiling with a Ceiling/Wall

Side View of mounting
Safety Wire
Fix to an anchor or
structure
In-Ceiling bracket
Backside ceiling bracket
Recessed Mounting Cover
* The figure shows VB-C500D.
To install the camera inserted into a ceiling/wall, use an Recessed Mounting Kit SR500-S-VB
(optional). Assemble the in-ceiling bracket before installation.
See Recessed Mounting Kit SR-500-S-VB Assembly Instructions, which is supplied with the
Recessed Mounting Kit, for assembly instructions.
1. Install the camera to the assembled in-ceiling bracket using four screws.
Make sure the interface cables are passed through in the direction of the opening in the
in-ceiling bracket, as in the figure below. Use the screws supplied with the Recessed
Mounting Kit to install the camera.
* The figure shows VB-C500D.
Audio interface cable
I/O interface cable
Power interface cable
LAN cable
VB-C500VD/VB-C500D
Step 4 Install the Camera
Roof space
Connect to a microphone
Connect to a speaker
Connect to an external device
Connect to an AC adapter or
external power supply
Connect to the network
Ceiling board
2-27