Canon VB-C500VD Start Manual page 66

Step 4 Install the Camera
9. Adjust the camera angle.
Push the inner cover in the direction of the arrow, as shown below, to remove the cover.
Tilt lock screw
Pan lock screw
Rotation lock screw
Zoom adjustment knob
* The figure shows VB-C500D.
10. Adjust the camera focus.
Loosen the zoom lock screw and focus lock screw, and adjust the viewing angle.
Adjust the zoom by moving the zoom adjustment knob and part A in the figure below at the
same time.
Adjust the focus by moving the focus ring.
When all adjustments are complete, tighten the zoom lock screw and focus lock screw to lock
the focus and viewing angle.
* The zoom lock screw operation applies to VB-C500VD only.
Zoom adjustment knob
Zoom lock screw
2-24
Focus lock screw
A