15
ELECTRICAL SYSTEM
15.7
Changing the high beam bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
Main work
–
Turn socket
–
Pull the socket with high beam bulb
–
Disconnect the socket with the high beam bulb from connector
–
Connect the new socket with the high beam bulb to the connector.
High beam (H9/socket PGJ19-5) (
L02162-10
counterclockwise.
p. 188)
out of the headlight housing.
and remove.
143