Table of Contents
Advertisement
18
SERVICE WORK ON THE ENGINE
6
0 0 6
18.3
Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Remove filler plug
Engine oil
–
Install and tighten the oil filler plug with O-ring.
L02203-10
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Fit the front spoiler. (
–
Install the left side cover.
–
Install the right side cover.
–
Check the engine oil level. (
and the O-ring from the clutch cover and fill up with engine oil.
1.5 l (1.6 qt.)
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
p. 98)
(
p. 101)
(
p. 104)
p. 160)
Outside temper-
Engine oil
ature: 0... 50 °C
(SAE 15W/50)
(32... 122 °F)
(
p. 195)
Outside tempera-
Engine oil
ture: −10... 40 °C
(SAE 10W/40)
(14... 104 °F)
(
p. 196)
163
Advertisement
Table of Contents
