15
ELECTRICAL SYSTEM
15.12
Checking the headlight setting
15.13
Adjusting the headlight range
–
Position the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
Distance
–
Position the vehicle perpendicular to the wall at a distance
on the low beam.
Guideline
400726-10
Distance
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
»
If the light-dark border does not meet specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
under the first mark.
p. 146)
5 cm (2 in)
from the wall and switch
5 m (16 ft)
p. 146)
146