12
SERVICE WORK ON THE CHASSIS
12.5
Removing the passenger seat
12.6
Mounting the passenger seat
–
Insert the ignition key in seat lock
–
Raise the rear of the passenger seat, push it towards the rear, and remove it upward.
–
Remove the ignition key from the seat lock.
V00043-10
–
Hook catches
and simultaneously push forward.
–
Press down the passenger seat until it clicks into place.
Warning
Danger of accidents The passenger seat can come loose from the anchoring if it
is not mounted correctly.
–
K00421-10
–
Finally, check that the passenger seat is correctly mounted.
of the passenger seat onto the storage compartment, lower the rear,
After mounting the passenger seat, check that it is locked correctly by
pulling up.
and turn it clockwise.
86