KTM 2016 690 DUKE R Owner's Manual page 158

17 TUNING THE ENGINE
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position and engage the gear-
ing.
–
Mount and tighten screw with the washers.
H01085-10
Guideline
Screw, shift lever
(Duke R)
–
Loosen nut
–
Loosen nut
–
Turn threaded rod
H01082-10
–
Tighten nut
Guideline
Shift rods, nut
 of the shift lever and shift shaft.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
M6

, holding threaded rod
Info

Nut has a left-handed thread.

, holding threaded rod

to adjust the shift lever.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.

, holding threaded rod
14 Nm Loctite
(10.3 lbf ft)

.

.

.
M6 6 Nm (4.4 lbf ft)
156
® 243™