11
TUNING THE CHASSIS
–
Raise the motorcycle with the work stand.
–
Remove the main silencer.
–
Remove the shock absorber.
Main work
(Duke)
–
Adjust the spring preload by turning adjuster
Guideline
Spring preload
Standard
Hook wrench (T106S)
V00044-10
(Duke R)
–
Measure and note down the spring length in the preloaded state.
–
Loosen retaining ring
Hook wrench (T106S)
Hook wrench (T157S)
–
Turn the retaining ring and adjusting ring until the spring is fully relieved of tension.
–
Adjust the spring preload by turning adjusting ring
Guideline
602558-10
Spring preload
–
Tighten retaining ring
Info
The spring preload can be set to 10 different positions.
and adjusting ring
.
.
4 clicks
with the special tool.
.
11 mm (0.43 in)
78