Running In The Engine - KTM 690Duke EU Owner's Manual

GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
–
Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
–
Before your first trip, read the entire operating instructions carefully.
–
Get to know the controls.
–
Adjust the basic position of clutch lever. (
–
Adjust the basic position of hand brake lever. (
–
Adjust the basic position of the foot brake lever.
–
Get used to handling the motorcycle on a suitable piece of land before making a longer trip. Try also to ride as slowly as possible to get
a better feel for the vehicle.
–
Hold the handlebars firmly with both hands and keep your feet on the footrests when riding.
–
Run the engine in.

Running in the engine

6.2
–
During the running-in phase, do not exceed the specified engine speed and engine performance.
Guideline
Maximum engine speed
During the first: 1,000 km (621.4 mi)
After the first: 1,000 km (621.4 mi)
–
Avoid fully opening the throttle!
p. 126)
p. 72)
x ( p. 76)
6,000 rpm
7,800 rpm
39