Changing The Turn Signal Bulb - KTM 690Duke EU Owner's Manual
Hide thumbs
Also See for 690Duke EU:
- Owner's manual (197 pages) ,
- Owner's manual (175 pages) ,
- Owner's manual (179 pages)
Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
Changing the turn signal bulb
9.50
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Remove the headlight mask with the headlight. (
–
Set down the headlight mask in front of you as shown in the illustration and carefully
tilt the high beam headlight in the direction of the low beam headlight.
–
Turn the bulb holder
700175-01
–
Pull the parking light bulb out of the holder.
–
Insert a new parking light bulb in the holder.
Parking light (W5W / socket W2,1x9,5d) (
–
Position the bulb holder and turn it clockwise as far as it will go.
–
Install the headlight mask with the headlight. (
700176-01
about 30° counterclockwise and remove it.
p. 157)
p. 104)
p. 106)
113
Advertisement
Table of Contents
