Draining The Coolant - KTM 690Duke EU Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Draining the coolant

x
9.58
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
–
Screw off radiator cap
The radiator must be completely filled.
» If the coolant level does not meet specifications:
–
Correct the coolant level and find out the cause of the loss.
Alternative 1
Alternative 2
700182-11
» If you had to add more coolant than the specified amount:
> 0.50 l (> 0.53 qt.)
–
Fill/bleed the cooling system.
–
Mount the radiator cap.
–
Position the fuel tank. (
–
Mount the seat. (
and check the coolant level in the radiator.

Coolant ( p. 168)
Coolant (mixed ready to use) (
x (
p. 91)
p. 90)
p. 168)
p. 124)
123