Table of Contents
Advertisement
Key Hardware
Components
Figure 1: Front Panel ECS4110-52T (upper) and ECS4110-52P (lower)
1
1
Port LEDs
2
1000BASE-T RJ-45 Ports
3
Gigabit SFP Slots
The switch consist of serveral key hardware components. This manual describes
each specific component, or related components, together with their installation
requirements and procedures in each chapter. To understand each component in
detail, refer to the relevant section.
2
10/100/1000BASE-T RJ-45 Ports
The switch contains 48 10/100/1000BASE-T RJ-45 ports that support 10/100/
1000BASE-T copper links to other devices. For more information, see
Connect to Twisted-Pair Copper Ports" on page
Gigabit SFP Slots
The switch contains four Small Form Factor Pluggable (SFP) transceiver slots that
operate up to Gigabit full duplex. For more information, see
SFP Fiber Optic Ports" on page
Mode Button (ECS4110-52P only)
Pressing the Mode button on the front panel will change the Diag LED to display
PoE status. For more information, see
page
40.
4
RJ-45 Console Port
5
System LEDs
6
LED Mode Button (ECS4110-52P only)
32.
36.
"Understanding the System Status LEDs" on
– 11 –
Chapter 1
| Switch Description
Overview
3
4
"How to
"How to Connect to
5
6
Advertisement
Table of Contents
