Table of Contents
Advertisement
Key Technical Specifications
Ground Point
The switch should be connected to ground using this screw connection. For more
information on how to connect ground to the switch, see
on page
25.
The following table contains key system specifications for the switch.
Table 1: Key Technical Specifications
Item
Ports
Network Interface
Buffer Architecture
Aggregate Bandwidth
Switching Database
LEDs
AC Input Power
Power Consumption
Weight
Size
Temperature
Humidity
Out-of-Band Management
In-Band Management
Software Loading
Forwarding Mode
Throughput
Flow Control
Specification
48 10/100/1000BASE-T RJ-45 ports with Auto-negotiation
4 Gigabit SFP transceiver slots
Ports 1~48: RJ-45
◆
RJ-45 connector, auto MDI/X
Ports 49~52: SFP
◆
Gigabit SFP transceivers
8 Mbits
104 Gbps
16K MAC address entries
System: Power, Diag (Diagnostic)
Ports 1~52: Status (link, activity, speed)
ECS4110-52P: AC 100-240 V, 50-60 Hz, 7 A
ECS4110-52T: AC 100-240 V, 50-60 Hz, 1 A
ECS4110-52P: 65 W
ECS4110-52T: 530 W
ECS4110-52T: 3.14 kg
ECS4110-52P: 5.27 kg
(W x D x H):
ECS4110-52T: 44.0 x 28 x 4.4 cm (17.32 x 11.0 x 1.73 in)
ECS4110-52P: 44.0 x 37.9 x 4.4 cm (17.30 x 14.94 x 1.73 in)
Operating: 0° C to 50° C (32° F to 122° F)
Storage: -40° C to 70° C (-40° F to 158° F)
Operating: 10% to 95% (non-condensing)
Front Panel RJ-45 console port
SSH, Telnet, SNMP, or HTTP
HTTP, FTP/TFTP in-band
Store-and-forward
Wire speed
Full Duplex: IEEE 802.3x
Half Duplex: Back pressure
– 13 –
Chapter 1
| Switch Description
Key Technical Specifications
"Grounding the Chassis"
Advertisement
Table of Contents
