Automatic Linkage With Applications - Fujitsu S1100 Operator's Manual

■ Automatic Linkage with Applications

When one of the applications which can automatically link with ScanSnap Manager is running
and you perform scanning, ScanSnap Manager will automatically link with the corresponding
application regardless of the current scan settings or whether you are using the Quick Menu.
Applications that can automatically link with ScanSnap Manager are as follows:
ScanSnap Organizer
Scanned image is displayed in ScanSnap Organizer.
CardMinder
Scanned image is displayed in CardMinder.
Rack2-Filer trial version (bundled with the ScanSnap) or Rack2-Filer (V5.0 or later
recommended/bundled model or sold separately)
Scanned image is saved in a binder in Rack2-Filer.
Scan to Mobile (*)
Scanned image is sent to a mobile device.
*: Automatic linkage is available only when the application is active.
There are two modes for automatic linkage.
Link when one of the above applications is active (recommended)
When ScanSnap Organizer, CardMinder or Rack2-Filer becomes active (with the
application's dialog box brought to front and selected on taskbar), performing a scan by
pressing the [Scan/Stop] button automatically starts the linkage between ScanSnap
Manager and the active application.
The example above shows ScanSnap Manager automatically linking with ScanSnap
Organizer when ScanSnap Organizer's main window is in front (active).
Configuring ScanSnap Manager (for Windows users)
94
Not active
Active