Fujitsu S1100 Operator's Manual page 389

3.
Click the [Apply] button.
4.
Click the [ ] button in the upper left corner to close the ScanSnap
setup window.
5.
Load the document in the ScanSnap.
For details about how to load documents, refer to
6.
Press the [Scan/Stop] button on the ScanSnap to start scanning.
Load another document in the ScanSnap when you want to scan multiple sheets. Scanning
starts automatically when a document is loaded.
7.
Press the [Scan/Stop] button on the ScanSnap to finish scanning.
Scanned image is saved in gray or black & white.
Using the ScanSnap in Various Ways (for Mac OS users)
389
"How to Load Documents" (page 31).