Saving Data In A Specified Folder - Fujitsu S1100 Operator's Manual

■ Saving Data in a Specified Folder

This section explains how to save the scanned image file in a specified folder.
You can save the scanned image file in a shared folder on the network and share it with
others. In addition, you can inform others of the destination folder path by an e-mail message
automatically created with the path stated.
The default e-mail program is used as the e-mail program to link with.
The e-mail program may not properly link with ScanSnap Manager even if it is the default e-mail
program. In this case, contact the manufacturer of the e-mail software.
Configure e-mail program settings in the following procedure.
Windows 7/Windows Vista
Windows XP
Tested e-mail programs
For details about the procedure to scan and save the scanned image in a specified folder
using or without using the Quick Menu, refer to the following:
Using the Quick Menu (→
Without Using the Quick Menu (→
1. Select [Start] menu → [Default Programs] → [Set your default programs].
The [Set your default programs] dialog box appears.
2. Select an e-mail program to link with ScanSnap Manager from [Programs].
3. Select [Set this program as default] and click the [OK] button.
The e-mail program selected in Internet Explorer [Tools] menu → [Internet Options] → the
[Programs] tab → [E-mail] drop-down list is used to link with ScanSnap Manager.
If no e-mail program is selected, select an e-mail program to link with ScanSnap Manager in
the [E-mail] drop-down list. E-mail programs that cannot be selected here cannot be set to
link with ScanSnap Manager.
- Windows Live Mail
- Windows Mail (Windows Vista)
- Outlook 2010 / 2007 / 2003
- Outlook Express 6
- Thunderbird version 3.1
page 104)
page 107)
103
Actions (for Windows users)