Automatic Linkage With Applications - Fujitsu iX500 Advanced Operation Manual

Automatic Linkage with Applications

When one of the applications which can automatically link with ScanSnap Manager is running and
you perform scanning, ScanSnap Manager will automatically link with the corresponding application
regardless of the current scan settings or whether you are using the Quick Menu.
Applications that can automatically link with ScanSnap Manager are as follows:
l ScanSnap Organizer
Scanned image is displayed in ScanSnap Organizer.
l CardMinder
Scanned image is displayed in CardMinder.
l Rack2-Filer Smart
Scanned image is saved in Rack2-Filer Smart.
l Rack2-Filer
Scanned image is saved in Rack2-Filer.
l Magic Desktop
Scanned image is saved in Magic Desktop.
l Scan to Mobile (*1)
Scanned image is sent to a mobile device.
ATTENTION
To enable automatic linkage with [Scan to Mobile], a mobile device must be connected to the
computer beforehand.
For details about connecting to the computer from your mobile device, refer to the Basic Operation
Guide (Mobile Connection) for your mobile device.
*1: Automatic linkage is available only when the application is active.
There are two modes for automatic linkage.
Link when one of the above applications is active (recommended)
When one of the above applications becomes active (with the application's window brought to the
front and selected on the taskbar), performing a scan by pressing the [Scan] button automatically
starts linkage between ScanSnap Manager and the active application.
147
Automatic Linkage with Applications