Fujitsu S1100 Operator's Manual page 371

3.
Change the settings for [Scan to SugarSync] (If you do not want to
change any settings, go to step 4.).
1. Click the [Application Settings] button.
The [Scan to SugarSync - Options] window appears.
2. Change the setting.
For details about the [Scan to SugarSync - Options] window, refer to the ScanSnap
Manager Help.
3. Click the [OK] button to close the [Scan to SugarSync - Options] window.
4.
Click the [Apply] button.
5.
Click the [ ] button in the upper left corner to close the ScanSnap
setup window.
6.
Load a document in the ScanSnap.
For details about how to load documents, refer to
7.
Press the [Scan/Stop] button on the ScanSnap to start scanning.
Load another document in the ScanSnap when you want to scan multiple sheets. Scanning
starts automatically when a document is loaded.
"How to Load Documents" (page
371
Actions (for Mac OS users)
31).