Fujitsu S1100 Operator's Manual page 367

Using the Quick Menu
To use the Quick Menu, you need to select the [Use Quick Menu] checkbox in the ScanSnap
setup window.
For details about how to perform scanning by using the Quick Menu, refer to
Menu" (page
1.
Load a document in the ScanSnap.
For details about how to load documents, refer to
2.
Press the [Scan/Stop] button on the ScanSnap to start scanning.
Load another document in the ScanSnap when you want to scan multiple sheets. Scanning
starts automatically when a document is loaded.
3.
Press the [Scan/Stop] button on the ScanSnap to finish scanning.
The Quick Menu appears.
4.
Change the settings for [Scan to SugarSync] (If you do not want to
change any settings, go to step 5.).
1. Click [Settings] under the [Scan to SugarSync] icon.
The [Scan to SugarSync - Options] window appears.
2. Change the setting.
For details about the [Scan to SugarSync - Options] window, refer to the ScanSnap
Manager Help.
3. Click the [OK] button to close the [Scan to SugarSync - Options] window.
260).
367
Actions (for Mac OS users)
"Using the Quick
"How to Load Documents" (page 31).