Fujitsu S1100 Operator's Manual page 261

The [Recommended] button is selected in default.
For details about the default settings when using the Quick Menu, refer to the
ScanSnap Manager Help.
You cannot change the settings for the [Recommended], [Small File], and [High Quality]
buttons. If you change any of these settings, the profile automatically switches to
[Customize].
For details about how to change scan settings, refer to
Settings" (page
4.
Click the [Apply] button.
5.
Click the [ ] button in the upper left corner to close the ScanSnap
setup window.
6.
Load the document in the ScanSnap.
For details about how to load documents, refer to
7.
Press the [Scan/Stop] button on the ScanSnap to start scanning.
You can also start scanning from the ScanSnap Manager menu.
For more details, refer to
Do not connect and disconnect the ScanSnap and other USB devices during scanning.
Do not close the feed guide during scanning.
Do not switch users during scanning.
The [ScanSnap Manager - Image scanning and file saving] window appears.
How to Perform a Scan (for Mac OS users)
273).
"ScanSnap Manager Menu" (page
261
"How to Configure Scan
"How to Load Documents" (page
256).
31).