Remove the optical drive.
8.
Remove the component drive cage blank
Do one of the following:
1.
For tower models, open and remove the bezel
o
For rack models, do the following:
o
If installed, remove the security bezel (on page 19).
a.
Remove the access panel.
b.
Release thumbscrews and remove the rack bezel.
c.
Remove the component drive cage blank.
2.
WARNING: To reduce the risk of personal injury from an electrical hazard, do not remove
more than one drive cage at a time.
("Remove the tower
("Remove the access
panel" on page 21)
("Remove the rack
bezel" on page 19).
bezel" on page 20)
Operations 27