CrimeStopper RS2-G3 Installation Instructions Manual page 19

15. HORN CHIRP Confirmation with LOCK or UNLOCK
This option allows the system to chirp the vehicle horn for Lock and Unlock confirmation. The horn output must be
connected to use this feature. Default = OFF.
Lock = 1 Chirp
Unlock = 2 Chirps
16. HORN CHIRPS with REMOTE START ACTIVATION:
This option allows the unit to provide 3 short chirps for audible confirmation of a remote start. The horn output wire
must be connected for this feature. Default = OFF.
17. HORN PULSE DURATION:
This option allows adjustment the "CHIRP" pulse duration of the car horns. The choices are 15, 20 or 30
milliseconds.
18. STARTER CRANK TIME: Default = 0.8 seconds
This option controls the Starter Cranking time. The choices are 0.8, 1, 1.2 & 1.4 seconds
TIMED START, use Hybrid Mode (option 1-4) with this option to set a fixed crank time. Please Note: In Hybrid
Mode there is only 1 start attempt and the ignition is left on.
19. PARK LIGHTS ON 30 SECONDS with UNLOCK:
Keeps parking lights on with remote unlock to assist in locating and providing illumination near your vehicle when
approaching at night for safety. The parking lights turn off when the ignition is turned on. Default = ON.
20. DIESEL GLOW PLUG DELAY:
The choices are 4, 10, 15 and 20 seconds. This feature provides a solution for diesel vehicles without having to
connect to the Glow Plug Wait-to-Start Circuit. This may be needed for various reasons. If your vehicle does not
have a valid Wait to Start wire (LED light on instrument cluster), or you cannot locate and identify the circuit, then
change your system to Diesel Glow Plug Delay. Once this mode is activated, you no longer need to connect up the
Wait-to-Start wire.
OPTION DESCRIPTIONS
19