Touch Screen Operation - Toyota TNS350 Owner's Manual

BASIC FUNCTION

Touch screen operation

In this system, you can select an operating
mode between the two scroll types: slide
and push modes. For detail of map scroll
operation, see " — Screen scroll operation
(direct-touch/one-touch scroll)" on page
32.
To prevent damage to the screen, lightly
touch the touch screen with the finger.
Do not use objects other than your
finger to touch the screen.
1. Touch .
2. Touch "Slide" or "Push" of "Scroll
type" to choose the scroll type.
INFORMATION
When a 2.5D map is displayed, the
system cannot be switched to the
slide mode.
24 TNS 350
● Operating in the slide mode
When the system is started for the first
time, the slide mode is selected.
FLICK
If you touch a point on the screen and flick
your finger, the screen will continuously
scroll in the direction in which you flicked
your finger. The screen automatically stops
scrolling in several seconds. The scrolling
can also be stopped by touching the
scrolling screen. The amount of scrolling
varies depending on the speed at which
you flick your finger.
This function can be used on the map
screen and some list screens.