Setting Up The Rs-232 Interface; Baud Rate - Intermec SR61T1D User Manual

Setting up the RS-232 Interface

SR61T Tethered Scanner User's Guide
4 Turn on the host device.
5 If necessary, use the configuration bar codes in the next section to
configure your SR61T serial parameters to match the PC.
The default serial parameters for the SR61T are:
Serial Parameter

Baud rate

Data bits
Parity
Stop bits
This section provides configuration bar codes for a basic setup. All bar
codes marked with (*) indicate the default value. For more
configuration options see
page 31.
Baud Rate
38400
115200
230400
Default Setting
57600
8
None
1
Chapter 4, "Configuring the SR61T" on
Chapter 3 — SR61T Interfaces
57600 (*)
128000
27