Maintaining The Sr61T; Upgrading The Sr61T - Intermec SR61T1D User Manual

Maintaining the SR61T

Upgrading the SR61T

SR61T Tethered Scanner User's Guide
Chapter 5 — Troubleshooting and Maintaining the SR61T
To keep your SR61T in good working order, you may need to upgrade
the SR61T firmware and clean the scanner window.
You may need to upgrade the SR61T firmware if there is an update
that incorporates changes to a feature or adds functionality to the
scanner. When you upgrade your scanner the current settings are
erased and replaced with the default settings. The process of
upgrading the SR61T takes about 10 minutes to complete.
To upgrade the SR61T you need:
• An RS-232, USB, or download cable. For more information on
cables, see "Required Accessories" on page
• Minimum PC operating system requirements are Microsoft®
Windows® XP with SP2 or Microsoft Windows 2000 with SP4 or
higher versions.
• EasySet version 5.6.4.0 or later with WinFlash version 3.1.1.1 or
later.
• The firmware update file (.bin).
Note: Before you start the upgrade process, make sure that you are
not using the selected COM port for any other application or you
receive an error and cannot use the COM port.
To upgrade the SR61T firmware
1 Download the latest SR61T firmware update package from the
Intermec web site at www.intermec.com.
a Go to Support > Downloads.
b From the Product Category drop-down list, choose Bar Code
Scanners.
c From the Product Family drop-down list, choose Rugged
Scanners.
d From the Product drop-down list, choose SR61 Hand Held
Scanner (or other SR61 product) and click Submit.
5.
41