Problems And Possible Solutions - Intermec SR61T1D User Manual

Problems and Possible Solutions

SR61T Tethered Scanner User's Guide
Chapter 5 — Troubleshooting and Maintaining the SR61T
Get sub-system version
Use this section to find possible solutions to problems you may have.
Problems and Possible Solutions
Problem
You pull the trigger, but
nothing happens.
You pull the trigger, the
red scanning beam
turns on, but you
cannot successfully scan
a bar code.
Possible Solution
The SR61T receives power from either a host or an
external power supply through an accessory cable.
Make sure:
•
You are using the appropriate cable. For more
information, see "Required Accessories" on
page 5.
•
The cable is connected to the appropriate port
on the host computer.
•
The universal power supply (if necessary) is
properly plugged in.
Try these possible solutions:
•
Make sure that the SR61T is configured for the
symbology you are scanning.
•
Make sure that the SR61T is at the appropriate
scanning distance from the bar code. Move the
SR61T closer and farther away to find the
appropriate distance.
•
Make sure that the SR61T is configured for the
type (1D, 2D, etc.) of bar code you are scanning.
•
The bar code you are trying to scan may be
poorly printed or too small. Scan a known good
bar code to make sure that the SR61T is
working properly.
For more information, see
on page 16.
"Scanning Bar Codes"
39