Core File (Cli Only) (*Mandatory Whenever Controller Has Restarted) - NEC UX5000 Easy Setup Manual

Chapter 4 - Troubleshooting
4.2.1.4

Core File (CLI Only) (*Mandatory whenever controller has restarted)

4 - 8
●
Core File (CLI Only)
●
A Telnet program and computer to install it is needed.
●
You can get information why the WL Controller has restarted.
●
Log in -> "dir". Check if there are any Core files.
●
A Core file format is "core:xxxxx.tar.gz". (xxxxx could be any number)
●
Crash File (from CLI or TFTP)
●
A TFTP server program and a computer to install it is needed. (A terminal
emulator installed computer can also be used for this purpose.)
●
Log in -> "copy [name of core file] tftp://x.x.x.x/[subdirectory name/
]filename" (xx.x.x.x: IP address of TFTP server computer)
* Do not use "core:" as the file name as ":" cannot be used in a file name.
Chapter 4